Body Work

Well the car is at the body shop now!

The body work and paint are being done at Alliance here in Houston.  They did Damian's car so we are pretty confident in their work.  We are going to do this in two stages body preparation first and then final body work and paint as a separate operation.

Here is the first pass at the body work.  The seams are basically sanded flat and then Duraglass is used to fill the seams.

Bodywork1.JPG (66570 bytes)

Bodywork4.JPG (85549 bytes)

There were not any areas that required major repair.  So the seams were fairly easy to fill. 

   Bodywork3.JPG (87224 bytes)

Bodywork2.jpg (75648 bytes)

Here is the body back in the garage after the seams were completed and the first coat of primer was applied.  Next in needs to be mounted on the chassis.

DCP_4068_.JPG (39297 bytes)

DCP_4069_.JPG (28823 bytes)

Home